Have you ever tried to run a cloth or duster over wood with no clear coat on it? It’s horrible! It catches on the wood, doesn’t remove the dust, and ultimately makes a bigger mess. Even worse is trying to clean wood that is permanently yellow from UV exposure and oxidization. Follow these 3 steps to create an easy-to-clean, won’t-get-discolored constant warm glow in your log or wood home. BONUS: Interior finishing needs to be done only once. Routine cleaning — wiping down cobwebs, dust that settles, fingerprints, etc. — is all that’s needed to maintain the finish and keep the wood looking like new.

Tips to Help You Choose a Log Home Stain Color You Love

Choosing a stain and actually staining are two very different things. Part of the plan must be to sample the stain on your unique logs so you know what color to expect.

request stain samples

Sampling log stain colors on your home is a key step to ensuring you’ll love the stain color you choose. But how do you know which type of log stain you need for your unique log home? We know the struggle is real, so we’ve simplified the stain selecting experience, including the way you sample log stain types and colors.

First, Consider Compatibility

If your home is already stained, stain compatibility is a huge issue because not all stains are compatible with one another — nor with all sealants. That’s why it’s important to select a stain that will be compatible with caulking and chinking. When you consider that an average 2,200 sq.ft. ranch-style log home has literally one mile of log joints, many of which will need to be sealed at some point in time, adhesion compatibility with the stain you use is critical.

Next, Think Stain Types and Performance

There are three different types of stains available to you. Keep in mind that not all stains are created equal, and how deep a stain penetrates doesn’t necessarily equate to better performance. The best value for your dollar may be in a more expensive stain that has been formulated for a specific type of application, i.e. decks, logs, wood siding, etc.

With all types, good prep is important to get maximum longevity. Sashco recommends going with a surface stain or a shallow penetrating stain, both of which afford your home the greatest protection and long-term performance. The three types of stains are discussed below.

Here’s How to Decide Which Stain Type You’ll Need

1. Surface Stains

Capture Log Stain and Cascade Clear Coat System, Symphony Interior Clear Coat

OK to use on restoration projects when the previous stain contained no non-drying oils (keep reading for details)
Little, if any, penetration into the first layer of closed wood cells
Rely on adhesion and elasticity for performance
Good for use on most wood surfaces — handrails and vertical surfaces
Should not be used on roofing shingles and does not perform well on decks
Quality brands (like ours) have good longevity

2. Shallow-Penetrating Stains

Transformation Stain Log and Timber and Transformation Stain Siding and Trim

Best for use on restoration products where the previous stain is oil-based or unknown
Penetrates into wood about 1-3 cells deep
Good for use on vertical wood surfaces
Some brands are good on decks and fences
Should not be used on roofing shingles
Quality brands (like ours) have good longevity

3. Deep Penetrating Oil Stains

Not a product Sashco makes – we only make high-performance product lines.

Can be used on log homes, but won’t last long
Can penetrate as much as ¼” or more into wood
Good for decks, hand-rails, and roofing materials
Not compatible with most other finishing products (sealants in particular)
Appearance is short-lived, even with frequent re-application

Choosing a Stain Color

Your stain color sets the tone of your home—which why it’s important to request samples and test several different stains and colors to ensure you get the color you want.

Sashco recommends that you stay away from clear stains. Why? In sun-drenched areas where only a clear stain is used, the wood’s natural color will begin to darken after only a few months. While you’re not alone in wanting to keep as natural a look as possible, clear coats that promise to preserve the “just built” look are misleading. It’s impossible to load enough UV absorbers in any clear stain to sufficiently protect your wood. And even though the stain may still be repelling water, dark yellow and gray discoloration of the wood is a sure sign that the UV absorbers have lost their effectiveness.

We recommend you stick with high-quality, UV-absorbing stains loaded with pigments – which is where you get the majority of your UV protection – and follow these sample testing procedures to make sure you get it right before you start.

Need help choosing a stain color?

Check out our Inspiration Gallery – where you can view our high-performance log stains, sealants, and chinking products on real log homes. You can view by stain type and color to get a feel for the endless possibilities. Create your dream home, order our log stain sample kit today!

Have more questions, call one of our log home gurus and they’ll be happy to answer any of your log home staining questions today. CALL NOW

At Sashco, we know that logs ain’t wood. So whether your’re finally building your dream home, looking to do some routine maintenance to keep your weekender log cabin looking beautiful, or in need of a complete log cabin renovation and restoration, we’re here to help with a full line of specialty log home finishing products.