- Interior & exterior wherever caulking and chinking are being applied. Backer rod:
- Cracks & checks
- Inbetween log courses
- Around windows and doors
- At butt joints Grip Strip:
- Specifically designed for use on wide chink joints on Appalachian-style log homes
- Log Gap Cap:
- Use between window trim and round logs to seal those pesky triangle-shaped gaps
Backer Materials that Seal Things Right the First Time
Backer Rod, Grip Strip, and Log Gap Cap all help you create the ideal joint desing for a long-lasting, durable seal
Any joint smaller than 1/4″ deep and 1/4″ wide – backer rod won’t fit
- Backer Rod: 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″ diameter
- Grip Strip: 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, and 2-1/2″ wide
- Log Gap Cap: Small (for 6-8″ diameter logs); Large (for 9″-11″ diameter logs)
Features and Benefits
Creates ideal joint design More Info
Backer materials ensure that all-important two-point adhesion so the sealant stretches and compresses correctly over time
Use less chinking and caulking More Info
Fills in the joint so you use less materials and save money
Water-tight More Info
Closed cell so that, even if a random tear shows up, moisture will not soak into the backer material and fester and rot.
Talk with a real human!
We’re here to help see your project through to the end.
Not sure which sealant, caulk, or other product is right for your job? Looking for the nearest location to buy products for your next home project? Don’t know exactly how to tackle your repair? We’re here to help.
Common Questions From Our Network of Pros
With flat or square logs, usually Grip Strip is preferred. With round logs, you can use either, but the round shape does help with the ideal hourglass shape bead, so keep that in mind.
There are many who will use a staple gun to staple the backer rod in a few places to help hold it in place. You can also use a few small pieces of clear packing tape or duct tape to help hold it in place.
That will depend on your joint size, but generally use one size smaller than the width of your joint. So, if your joint is 1/2″ wide, get the 3/8″ backer rod.
On flat joints, both duct tape and clear packing tape will work well. If the joint is less than 1/4″ wide, you won’t be able to fit a backer rod OR tape. Be sure to thoroughly flood those cracks and checks with stain and check them often (twice a year). Once they’re wide enough to accomodate a backer rod, seal ’em up.