Metals: Aluminum, Brass, Steel, Copper, Silver. Plastics: ABC, Vinyl, Nylon, Fiberglass, PVC, Acrylic sheet, Plexiglass, Polycarbonate.
Other surfaces: Asphalt, Stone, Ceramics, Concrete, Drywall, Glass, Stucco, Porcelain, Thinset, Wood, EIFS, Alkyd stain, Brick, Canvas, Cement, Mortar, Fiber Cement, Corian®, Formica®. *Corian® and Formica® are registered trademarks of their respective owners.
The Tough Elastic Sealant For Every Job
Sticks To Most Anything
10.5oz – $11.49 USD
5oz – $7.99 USD
Polystyrene insulation or foam, Aquaseal®, Kynar®, Teflon®, polypropylene, polyethylene, silicone, waxes. Plastics not listed should be tested for compatibility before widespread use.
Clear 10.5 oz – 13010
Clear 5 oz – 13013
White 10.5 oz – 13030
White 5 oz – 13033
White VOC 10.5 oz – 13080
White VOC 5 oz – 13043
Features & Benefits
Highly Elastic More Info
Lexel is relaxed when stretched. The high elasticity and the “give” that it has provides incredible durability.
Sticks to Difficult Surfaces Even When Wet More Info
If you only have room for one sealant in your toolbox, this is a good one to have since it will work on most anything.
19 Times Clearer than Silicone More Info
It’s easy to recognize the clarity of Lexel in the cartridge. It also stays clear. It won’t yellow or get clowdy over time.
Instantly Waterproof More Info
Lexel will displace the water to seal a leak. Even when applied underwater, it will remain intact and have a waterpoof film when it dries.
Talk with a real human!
We’re here to help see your project through to the end.
Not sure which sealant, caulk, or other product is right for your job? Looking for the nearest location to buy products for your next home project? Don’t know exactly how to tackle your repair? We’re here to help.
Common Questions From Our Network of Pros
It’s a synthetic copolymer rubber.
You don’t. That’s kinda the point. But if you are unfortunate enough to have to get it off, try a solvent-based caulk remover, a putty knife, and good-old fashioned elbow grease.
No. We hate silicone.
It can be applied to active leaks as it will displace the water. We have not done rigorous 30 day submersion testing, but we do hear of folks using it successfully for swimming pools, boats, kayaks, etc.
We don’t recommend it. Try a test patch to see if you are happy with the adhesion.
Use clear glass cleaner, water with a little soap, or mineral spirits on the bead/on your finger. If you’re applying large amounts, you may want to check out our Cobra Nozzle which lays down a neat bead with no tooling required afterward.