Products

Symphony Interior Clear Coat


Symphony Logo
Symphony

- Enhances natural wood grain

- Smooth finish makes walls easy to clean

- Use alone or over High Sierra or Sashco's Capture Log Stain

- Use on all vertical wood surfaces

- Water-based – easy to apply and clean up

- Freeze-thaw stable

Application


New Wood
If you've decided to keep your logs natural looking and only want to apply Symphony to bare wood, best results are obtained if you sand the wood to a smooth finish with fine sandpaper. Be certain to remove all dust before finishing. Do not use steel wool; it may cause rust stains. For a smoother finish, sand between coats.

Finished Wood
Compatibility is a huge issue, so logs that already have some type of stain or sealer on them will need to be tested for compatibility; call us and we will talk you through the testing procedure. For best adhesion to non-Sashco coatings, it is usually best to lightly sand the surface before applying Symphony. Old finishes may need to be mechanically removed if a lighter appearance is desired.

Dilution/Stirring
Do not dilute. Stir thoroughly before using. Do not shake as this will cause foaming.

Application Methods
Brush or spray on two or more coats. More coats will impart a higher sheen. If brushing, use a high-quality synthetic bristle brush, such as Purdy® brand. Back brushing after spraying will enhance penetration into the wood surface. Brush material in the direction of the grain. Do not over-brush (bubbles can form). Sand between coats for a smoother finish.

Dry Time
Symphony will dry to touch in one hour and can be sanded after two hours (when the air is warm and dry). Recoating can be done after 1-2 hours. Allow wood that will be handled to dry overnight. Actual dry time depends on thickness of coats, temperature and humidity.


Technical Data


Sheen Levels
Gloss, Satin

Packaging
1-gallon and 5-gallon plastic pails

pH
8-9

Viscosity
400-600 cps @ 60 rpm with #3 spindle

VOC
Less than 250 g/L

Solids
23%

Density
(wt/gal) 8-9 pounds/gallon

More Information


Download Product Info (PDF)

Adobe Reader Required

Adobe Reader

Product information is provided in Adobe PDF files. You will need the [free] Adobe Reader to view and print these documents.

Download Adobe Reader


Questions?

Do you have questions about our products? Contact Customer Service.

Toll-Free: 1-800-767-5656


Share

Share this page using your favorite web sites and web services.

Usage Note
You must have an account / be signed in before you can post to certain sites.