Cascade Finishing Top Coat
- Finishing top coat for Sashco's Capture Log Stain
- Maintenance coat for High Sierra
- Extends life of underlying finishes
- Ultra water repellent
- Dries crystal clear
- Water-based - easy to apply and clean up
- Freeze-thaw stable
Application
- Check that the pigmented coat of Sashco's Capture Log Stain is firm and set. Dry time is between 4 and 24 hours, depending on temperature and humidity.
- Thoroughly stir Cascade before application to clean, stained, exterior logs. Use a garden sprayer or airless paint sprayer to apply and brush out runs.
- If the wood is very porous and the sheen on the logs is uneven after applying 1 coat of Cascade, multiple coats may be required for an even appearance.
- It is always good practice to try and protect logs as much as possible from exposure to moisture shortly after applying Cascade.
Technical Data
Packaging
One-gallon and five-gallon pails
Coverage Rate
300-600 sq. ft. per gallon, depending on surface roughness.
Application Range
40°F (4°C) and rising to 90° (32°C) and falling. In severe conditions
(under 40°F (4°C) and/or 70%+ humidity), full rain resistance may take longer.
Cover exterior walls with plastic if rainfall or snowfall is expected within 24
hours after application.
Recommended Wet Film Thickness
1 mil (use a gauge if in doubt)
Dry Time
Cascade dries to touch in 30 minutes or less in ideal weather.
VOCs
Less than 250g/L
Viscosity
Water thin
pH
8.5-9.5
Density
8-9 lbs./gal.
Solids
18-25%
Odor
Mild, sweet
Freeze-thaw
Passes at least 5 cycles
More Information
- Cascade FAQs www.sashco.com/log/faqs.aspx?query=cascade
- Product Estimator
- Store Locator www.sashco.com/log/buy.aspx
Download Product Info (PDF)
Adobe Reader Required
Product information is provided in Adobe PDF files. You will need the [free] Adobe Reader to view and print these documents.
Questions?
Do you have questions about our products? Contact Customer Service.
Toll-Free: 1-800-767-5656