Skip Navigation Links
Home
Products
Where to Buy
Applicators
Maintenance
FAQ's
Estimator
Contact Us


  Skip Navigation Links
Prepare
CPR
The Kernel
Preserve
Cobra
Impel Rods
Penetreat
Stay-Clean
Stacking
Blue Ox
Blue Max
Conceal
Log Builder
Stacker
Stain & Finish
BrushOver
Capture Log Stain /
Cascade
High Sierra Log Stain
Symphony
Transformation Stain
Seal
Backer Rod
Chinker's Edge
Conceal
Log Builder
Log Jam
Equipment
The Kernel
The Snorkler
Albion Guns
Buffy Pad System
Delta Infrared
Thermometer
Makita 9565
Neoterik
Nozzles
Osborn Brushes
Wagner Moisture
Meter

 
 

Buffy Pad System

Buffy Pad System

Three elements make up the system (see right). The 5" non-woven Buffy Pad is pressed and twisted into the Grabber Pad (and then pressed into it again and reverse twisted, for solid holding power). The Grabber Pad protects the much more expensive Backer Pad from damage. The Backer Pad screws onto the 5/8" X 11" grinder/polisher arbor. Buffies are excellent for de-felting and removing loosely-held, weathered coatings, as well as bare, weathered wood. They are gentler than Osborn™ Brushes and they better preserve such fine log details as draw-knife ridges, and are particularly effective on interior surfaces (though they work well on exteriors). If used for an entire log home, it can take 100 to 200 Pads per average-sized home. Buffies work best to reduce cob-blasting texture - without removing all of the valuable stainholding

roughness. They leave little or no swirls in the wood and work much faster than random orbital sanders. Great on most hand-rail spindles and on most flat surfaces (as well as round)! The only drawback is that they do not impart significant texture to the wood all by themselves. Available only from Sashco.


The Buffy Pad System (5" pads):
  • Extremely fast de-felting
  • Gentle, fast prep of new logs, wood
  • Ideal as sole interior prep method
  • Economical
  • Super easy to use and change-out (no lock-nuts, or tools required!)


1. Buffy Pad (30 pads per bag)Buffy Pad System
The non-woven fabric pad that is pressed into the black plastic "T" hooks of the Grabber Pad
- and twisted both ways to engage both legs of the hooks.
2. Grabber Pad (10 pads per bag)
This pad holds the Buffies and protects the expensive Backer Pad. Grabber Pads are used up
at the rate of about 1 per every 10-20 Buffy Pads.
3. Backer Pad (1 each per bag)
This pad attaches to the 5/8" x 11 arbor (i.e., threaded end of the attachment shaft) of
grinders and sanders, and holds the Grabber Pad. The rubber, tapered face allows the system
to easily follow the contours of irregular wood surfaces.

(Buffy Pads should NOT be run at speeds higher than 4,000 rpm! Be sure to wear proper eye, respiratory and hand protection - contact Sashco at (800) 767-5656 for assistance. Keep people away that do not have proper protective equipment on.)

For more information about the Buffy Pad System contact us at Sashco.
View Product Warranty
 
© 2002, Sashco, Inc. All Rights Reserved.
Legal Notices and Terms of Use. Privacy Statements.

Comments or Suggestions: webmaster@sashco.com